Helmet fit guide

All Sweet Protection helmets are made to ensure your safety and comfort whether you are riding your bike, paddling down the river or snowboarding in the backcountry.

Our helmets are categorized in three main categories; ski and snowboard, bike and paddle sports. Each category has individual needs for use and certifications, and it is obviously some seasonal changes as well. Helmets made for ski and snowboard are designed, tested and certified with the materials and construction which endure the cold weather.

The helmets will keep you warm and they will work with your goggles. When you bike you typically would like to have as much venting as possible, hence the bike helmets have high focus on providing as good air flow as possible while still being as safe as possible. Here's a guide that will take you through how to size and choose the right helmet.

The circumference of the head isn't a perfect circle – nor do different people have the same length to width ratio. Therefore, looking at sizes without trying can be a tricky task. But let's give it go.

Your goggles should fit comfortably with your goggle strap over the helmet. There should be no gap between the top of your goggles and the helmets (the so called "gaper gap"). The Sweet Protection goggles ensures a perfect fit to your helmets. The fit might vary depending on the the size and shape of your head, but in general the models Firewall, Interstellar and Clockwork MAX will fit helmets from size M/L and up, while Clockwork will fit helmets from S/M to M/L. For our racing helmets we recommend Clockwork/Clockwork MAX or the Clockwork World Cup models.

For other manufacturers we can’t recommend the best possible fit other than to encourage you to try in store.

Our helmets are made to absorb some of the potential energy of a blow. Even though damage may not be visible or apparent, it is imperative to discard and replace any helmet that has sustained a major impact in an accident or has received a similarly severe blow. An inspection of the helmet might not reveal any apparent damage, but it might be there. We also advise that any helmet should be replaced after approximately three years of normal use, or sooner if exposed to long periods of sun, hard use, or any contact with chemicals. Your helmet must also be replaced if it does not fit anymore.

A helmet will be damaged if exposed to temperatures exceeding 62°C (approx. 150°F). Do not leave the helmet in a car (or similar) in hot weather, as it may easily exceed this temperature. If exposed to such temperatures, the helmet must be immediately discarded and replaced.

Our helmets will not perform as intended if you modify or replace any of the original elements included in the helmet. Please note that any customizing is not recommended, and that this will invalidate the warranty. Sweet Protection or its distributors accept no liability for damage or injuries resulting from misuse or from a modified helmet.

For cleaning, use clean water (max temperature 30°C) and mild detergent only. Leave to dry naturally and not in contact with direct heat or on a hot surface. Avoid any applications of paint, adhesive stickers/transfers, cleaning fluids, chemicals and other solvents that may drastically reduce the protection properties.

For more details of our recommended care for Sweet Protection products please refer to our care guide.

We have made a simple guide for how you should fasten your helmet. Please have a look.