Helmet fit guide
All Sweet Protection helmets are made to ensure your safety and comfort whether you are riding your bike, paddling down the river or snowboarding in the backcountry.
Our helmets are categorized in three main categories; ski and snowboard, bike and paddle sports. Each category has individual needs for use and certifications, and it is obviously some seasonal changes as well. Helmets made for ski and snowboard are designed, tested and certified with the materials and construction which endure the cold weather.
The helmets will keep you warm and they will work with your goggles. When you bike you typically would like to have as much venting as possible, hence the bike helmets have high focus on providing as good air flow as possible while still being as safe as possible. Here's a guide that will take you through how to size and choose the right helmet.
Sizing and fit
The circumference of the head isn't a perfect circle – nor do different people have the same length to width ratio. Therefore, looking at sizes without trying can be a tricky task. But let's give it go.
Ski and snowboard helmets
2. Try the helmet
A proper fitting helmet should be snug all the way around your head. It should not move around and you don't want any excess space between the helmet and your head. But it should not be so tight that you feel pressure or pain points. You can easily perform a "shake test" to check how your Sweet Protection helmet fits. Shake your head around with helmet on. If it moves on its own or shakes separately from you head, the helmet is too big. Use your hand and move the helmet to the left and right, up and down. The skin on your head should move with the helmet without the helmet shifting on its own. You can choose to buckle the helmet now, and make sure the chin strap is tight and fastened correctly. It will not impact the fit of the helmet, just keep the helmet on your head.
The Sweet Protection helmets can be adjusted to fit your head perfectly either by adjusting with Occigrip solution or with the fitpads that comes with the helmet.
The Sweet Protection adjustable fit system
The Occigrip Turn-dial provides easy adjustment with a low volume mechanism. The Occigrip construction provides a firm and comfortable fit and prevents the helmet from rolling on your head. Adjustable in reach and height.Fitpads
A snug and comfortable helmet fit is important. All Sweet Protection comes with fitpads with your purchase so you can ensure a perfect fit. Place the Fitpads according to the supplied manual for the ultimate personalized fit.
How to change Sweet Protection bike Comfort pads?
How to customize your Sweet Protection helmet with Fitpads?
3. Fitting with goggles
Your goggles should fit comfortably with your goggle strap over the helmet. There should be no gap between the top of your goggles and the helmets (the so called "gaper gap"). The Sweet Protection goggles ensures a perfect fit to your helmets. The fit might vary depending on the the size and shape of your head, but in general the models Firewall, Interstellar and Clockwork MAX will fit helmets from size M/L and up, while Clockwork will fit helmets from S/M to M/L. For our racing helmets we recommend Clockwork/Clockwork MAX or the Clockwork World Cup models.
For other manufacturers we can’t recommend the best possible fit other than to encourage you to try in store.
4. When should a helmet be replaced?
Our helmets are made to absorb some of the potential energy of a blow. Even though damage may not be visible or apparent, it is imperative to discard and replace any helmet that has sustained a major impact in an accident or has received a similarly severe blow. An inspection of the helmet might not reveal any apparent damage, but it might be there. We also advise that any helmet should be replaced after approximately three years of normal use, or sooner if exposed to long periods of sun, hard use, or any contact with chemicals. Your helmet must also be replaced if it does not fit anymore.
A helmet will be damaged if exposed to temperatures exceeding 62°C (approx. 150°F). Do not leave the helmet in a car (or similar) in hot weather, as it may easily exceed this temperature. If exposed to such temperatures, the helmet must be immediately discarded and replaced.
Our helmets will not perform as intended if you modify or replace any of the original elements included in the helmet. Please note that any customizing is not recommended, and that this will invalidate the warranty. Sweet Protection or its distributors accept no liability for damage or injuries resulting from misuse or from a modified helmet.
5. How to care for your helmet
For cleaning, use clean water (max temperature 30°C) and mild detergent only. Leave to dry naturally and not in contact with direct heat or on a hot surface. Avoid any applications of paint, adhesive stickers/transfers, cleaning fluids, chemicals and other solvents that may drastically reduce the protection properties.
For more details of our recommended care for Sweet Protection products please refer to our care guide.
6. How to properly fasten your helmet
We have made a simple guide for how you should fasten your helmet. Please have a look.
How to Wear a Helmet
Stronger. Lighter. Better.
We all know that having the right gear can make all the difference when it comes to comfort, performance, and safety on the road or trail. Our selection includes gear for the road cyclist, the mountain biker as well as the commuter. Keep an eye our for our award-winning cycling helmets, eyewear, protection and clothing that will keep you safe and confident to live to play another day.
Falconer Aero 2Vi® Mips helmet
The Falconer Aero 2Vi® Mips by Sweet Protection is their most advanced road cycling helmet developed with the Uno-X Pro Cycling Team to deliver aerodynamic performance, optimum comfort and enhanced protection in a seriously fast and lightweight package. The hunt is on.
The key factor in achieving optimal vision on the mountain is selecting the right lens and its lens technology. At Sweet Protection, we have created our own proprietary lens technology, known as RIG® Lens Technology, developed in Norway to deal with the most difficult light conditions. The technology focuses on providing superior contrast enhancing vision, minimum color distortion and reduced eye fatigue.