Helmet fit guide

To find the right size, wrap a measuring tape around the head, just above the ears (see figure). Try to keep it level front to back. Once you have your measurement, you can use the chart below as a guide. Some of our helmets have different measurements, so please located the one you want.

Keep in mind that all Sweet Protection helmets have adjustment systems and are delivered with fit pads to ensure the perfect fit.

The circumference of the head isn't a perfect circle – nor do different people have the same length to width ratio. Therefore, looking at sizes without trying can be a tricky task. But let's give it go

A proper fitting helmet should be snug all the way around your head. It should not move around and you don't want any excess space between the helmet and your head. But it should not be so tight that you feel pressure or pain points. You can easily perform a "shake test" to check how your Sweet Protection helmet fits. Shake your head around with helmet on. If it moves on its own or shakes separately from you head, the helmet is too big. Use your hand and move the helmet to the left and right, up and down. The skin on your head should move with the helmet without the helmet shifting on its own. You can choose to buckle the helmet now, and make sure the chin strap is tight and fastened correctly. It will not impact the fit of the helmet, just keep the helmet on your head.

The Sweet Protection helmets can be adjusted to fit your head perfectly either by adjusting with Occigrip solution or with the fitpads that comes with the helmet.

Your goggles should fit comfortably with your goggle strap over the helmet. There should be no gap between the top of your goggles and the helmets (the so called "gaper gap"). The Sweet Protection goggles ensures a perfect fit to your helmets. The fit might vary depending on the the size and shape of your head, but in general the models Firewall, Interstellar and Clockwork MAX will fit helmets from size M/L and up, while Clockwork will fit helmets from S/M to M/L. For our racing helmets we recommend Clockwork/Clockwork MAX or the Clockwork World Cup models.

For other manufacturers we can’t recommend the best possible fit other than to encourage you to try in store

We have made a simple guide for how you should fasten your helmet. Please have a look.

The Occigrip Turn-dial provides easy adjustment with a low volume mechanism. The Occigrip construction provides a firm and comfortable fit and prevents the helmet from rolling on your head. Adjustable in reach and height.z

A snug and comfortable helmet fit is important. All Sweet Protection Snow Helmets comes with fitpads with your purchase so you can ensure a perfect fit. Place the Fitpads according to the supplied manual for the ultimate personalized fit.

For cleaning, use clean water (max temperature 30°C) and mild detergent only. Leave to dry naturally and not in contact with direct heat or on a hot surface. Avoid any applications of paint, adhesive stickers/transfers, cleaning fluids, chemicals and other solvents that may drastically reduce the protection properties